Norscreen Filters Logo Techron Equipment Ltd Tel: 01903 732781
Norscreen Filters Cards accepted Mastercard and VISA
This is a trade site for business to business sales. Prices exclude both VAT, which will be charged at 20%, and carriage.
Click here for news page
Open 9 to 5 Mon Tue Thur Fri
Insect and rodent screen comprising mesh cylinder, protected by perforated metal outer, with sleeve to slide over the end of a pipe and a worm drive clip to secure in place
End of Line Screen Clamp Fitting
Set of parts to provide insect screening for warning or overflow pipe, up to 23mm OD, comprising a tank connector, the screen holder and a dip pipe
Warning Pipe Kit
Insect screen in a moulded plastic body, supplied with moulded in BSP male threads and a lift-off inspection and cleaning cover
Inline Screen up to 2 inch
Insect and rodent screen fitted into a section of BS PVC pipe
Inline Screen 2½ inch and above
Insect and rodent screen in a stainless steel body, provided with BSP sockets at both ends
Inline Screen all stainless steel with BSP sockets
Insect and rodent screen in a stainless steel body, provided with bolted flanges at both ends
Inline Screen all stainless steel with flange
Cowl vent for small cisterns, comprising a holder for an insect screen, with a cowl over it to exclude dust and dirt, which pushes onto the end of a connector. The connector has an integral washer and cutting marks, to allow it to be reduced in length by 25mm or 50mm, and is supplied with two EPDM washers and a ¾ inch BSP nut
Cowl Vent ¾ inch BSP
Grey PVC vent with insect screen. 4 inch BSP threaded shaft, fitted with two PVC nuts, one with a conformable foam washer. Grey PVC cowl over screen.
Cowl Vent 4 inch BSP
Contact Us
Hosting by Edge Hosting

Plastic Bodied Inline Insect Screens up to 2" BSP

Blue plastic inline insect screen, comprising a cylinderical body, with clip-on lid, having two 2 inch BSP male threaded connections at the base.

This is a range of insect screens that use a plastic moulded body, with a removable stainless steel mesh screen insert. The body is available with male threaded connections in sizes from 1 inch BSP to 2 inch BSP. The 1 inch size is also available with adaptor kits to suit ¾ inch BSP thread and 22mm copper pipe.

The body has a removable lid, which allows access to the screen for cleaning. It can be mounted in any orientation, except with the lid at the bottom. A clear space of 125mm is required above the lid, to allow for removal of the filter. The screen size is at least 250% of the cross-sectional area of the pipe, to ensure there is no restriction to flow.

These screens are rated to a maximum of 0.5 bar pressure and should be mounted no more than 1 metre vertically below the highest point of the overflow.

Length over threads 136mm
Height, including cap 110mm
Clearance required to remove screen 125mm above cap

Click on any product image to view the individual product data sheet.

Blue plastic inline insect screen, comprising a cylinderical body, with clip-on lid, having two 1 inch BSP male threaded connections at the base.Click here to view data sheet

Part LP100-028M

Plastic Body Inline Insect Screen with 1 inch BSP male threads.

Can be used with our adaptor kits for ¾ inch BSP and 22mm copper pipe or with copper compression fittings on 28mm.

£19.61 + VAT each

Blue plastic inline insect screen, comprising a cylinderical body, with clip-on lid, having two 1.25 inch BSP male threaded connections at the base.Click here to view data sheet

Part LP125-035M

Plastic Body Inline Insect Screen with 1¼ inch BSP male threads.

Requires 2 x BSP female to copper compression fitting adaptors for use with 35mm copper pipe

£22.90 + VAT each

Blue plastic inline insect screen, comprising a cylinderical body, with clip-on lid, having two 1.5 inch BSP male threaded connections at the base.Click here to view data sheet

Part LP150-042M

Plastic Body Inline Insect Screen with 1½ inch BSP male threads.

Requires 2 x BSP female to copper compression fitting adaptors for use with 42mm copper pipe

£29.46 + VAT each

Blue plastic inline insect screen, comprising a cylinderical body, with clip-on lid, having two 2 inch BSP male threaded connections at the base.Click here to view data sheet

Part LP200-054M

Plastic Body Inline Insect Screen with 2 inch BSP male threads.

Requires 2 x BSP female to copper compression fitting adaptors for use with 54mm copper pipe

£39.31 + VAT each

Adaptor kit to convert 1 inch BSP screen to ¾ BSPClick here to view data sheet

Part LA100-075M

Adaptor kit to convert 1 inch BSP inline screen to ¾ inch BSP male thread. (Does not include screen shown in picture)

£10.33 +VAT each

Adaptor kit to allow 1 inch BSP screen to accept 22mm copper pipe.Click here to view data sheet

Part LA100-022C

Adaptor kit to allow 1 inch BSP inline screen to fit 22mm copper pipe. (Does not include screen shown in picture)

£12.03 + VAT each

Delivery £12 + VAT or less per order, up to 20kgs to most UK mainland destinations.

All items on this page are normally available from stock.

Note: None of the products on this page require WRAS approval, as they only come into contact with water that is running to waste.